Shop
Showing 1026–1050 of 2445 results
-
Networking Products, Computer Servers
HPE 32GB 2Rx8 PC5-4800B-R Smart Kit (P43328-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Option Part HPE 32GB 2Rx8 PC5-4800B-R Smart Kit (P43328-B21) Memory Capacity Standard 32 Gigabytes (Single 32GB Module) Memory Generation Classification DDR5 (PC5 Standard) DIMM Structural Layout Type RDIMM (Registered DIMM) Native Operating Speed 4800 MT/s (MegaTransfers per second) CAS Latency Timings CAS-40-39-39 Profile Rank Configuration Array Dual Rank (2Rx8 Topology) Operating Voltage Specification 1.1 Volts baseline Error Correction Handling Advanced On-Die & System-Level ECC Server Hardware Platform Gen Explicitly for HPE ProLiant Gen11 Architecture Primary Platform Compatibility HPE ProLiant DL325, DL345, DL360, DL365, DL380, DL385, ML350 Gen11 SKU: n/a -
Networking Products, Computer Servers
HPE 960GB SATA RI SFF BC MV SSD (P40498-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Option Part HPE 960GB SATA RI SFF BC MV SSD (P40498-B21) HPE Alternate Spare Part Number P41523-001 Raw Storage Capacity 960 Gigabytes Interface Protocol Speed SATA 3.0 (6 Gigabits per second) Physical Drive Form Factor 2.5-inch Small Form Factor (SFF) Carrier Frame Integration HPE Basic Carrier (BC Enclosure) Workload Classification Profile Read Intensive (RI Tier) Flash Memory Infrastructure Multi-Layer Triple-Level Cell (TLC) NAND Sequential Read / Write Performance Up to 515 MiB/s / Up to 480 MiB/s Random Read / Write IOPS (4KiB) 58,500 IOPS / 29,000 IOPS Endurance Rating (DWPD) 0.8 Drive Writes Per Day over 5 Years Total Lifetime Endurance (TBW) 1,400 Terabytes Written Firmware Integrity Protection Digitally Signed Firmware (DS Secure) Primary Platform Compatibility HPE ProLiant Gen10 Plus, Gen11, Gen12 Systems SKU: n/a -
Networking Products, Computer Servers
HPE 96W Smart Storage Battery with 145mm Cable Kit (P01366-B21)
Networking Products, Computer ServersHPE 96W Smart Storage Battery with 145mm Cable Kit (P01366-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Part Number HPE 96W Smart Storage Battery with 145mm Cable Kit (P01366-B21) Battery Chemical Composition Lithium-Ion (Li-Ion) Power Output Rating 96 Watts (Megacell Power Delivery Profile) Pack Power Metrics 7.2 Volts / 10.8 Watt-hour capacity Included Cable Assembly 1x Dedicated 145mm (5.7-inch) Power Interface Cable Maximum Supported Devices Up to 20 to 24 independent Smart Array Controllers and/or NVDIMMs Environmental Hazard Class Low-Halogen / Class 9 Dangerous Goods (Shipping restrictions apply) Server Generation Bracket Fully compatible with HPE ProLiant Gen9, Gen10, and Gen10 Plus server models Physical Dimensions 139 mm x 19.5 mm x 29 mm (Compact internal server slot mount) Product Weight Approximately 453.59 grams SKU: n/a -
Networking Products, Computer Servers
HPE Aruba Instant On 1960 24G 2XGT 2SFP+ 370W PoE Switch (JL807A)
Networking Products, Computer ServersHPE Aruba Instant On 1960 24G 2XGT 2SFP+ 370W PoE Switch (JL807A)
Technical Specifications
Feature Specification Details Model SKU / Product Code HPE Aruba Instant On 1960 24G 2XGT 2SFP+ 370W PoE Switch (JL807A) Total Base Electronic Ports 24 x 10/100/1000 Mbps RJ-45 PoE Ports 10G Dedicated Uplink Ports 2 x 10GBASE-T Copper & 2 x 10G SFP+ Fiber Slots Total PoE Power Budget 370 Watts (Class 4 PoE / 802.3at) Total Switching Capacity 128 Gbps Packet Throughput Rate 95.23 Mpps (Million packets per second) MAC Address Table Size 16,000 Entries Stacking Capabilities True Stacking up to 4 Switches (Local or Cloud) Management Architecture Aruba Instant On Cloud, Web GUI, or Local SNMP Input Operating Voltage 100 – 240 Volts AC (Internal Power Supply) Max Power Draw / Idle 439.0 Watts (Max with full PoE) / 31.0 Watts (Idle) Physical Form Factor 1U Rack-mountable (Mounting brackets included) Dimensions & Weight 442.5 mm x 350.5 mm x 43.9.5 mm / 4.70 kg Manufacturer Warranty Aruba Limited Lifetime Warranty SKU: n/a -
Networking Products, Computer Servers
HPE Aruba Networking CX 6100 48G 4SFP+ Switch (JL676A)
Technical Specifications
Feature Specification Details Model SKU / Product Code HPE Aruba Networking CX 6100 48G 4SFP+ Switch (JL676A) Total Base Electronic Ports 48 x 10/100/1000 Base-T Gigabit RJ-45 Ports (Non-PoE) 10G Dedicated Uplink Ports 4 x 1G/10G SFP+ Fiber/Copper Slot Array Power Over Ethernet (PoE) Non-PoE Model Total Switching Capacity 176 Gbps (Non-blocking infrastructure bandwidth) Packet Throughput Rate Up to 98.6 Mpps (Million packets per second) Processor & Hardware Engine Dual-Core ARM Cortex A9 @ 1016 MHz System Onboard Memory 4 GB DDR3 RAM / 16 GB eMMC Flash Memory Packet Buffer Allocation 12.38 MB (4.5MB Ingress / 7.875MB Egress) MAC Address Table Size 8,192 Entries Latency (1 Gbps / 10 Gbps) 1.9 µs / 1.8 µs Maximum System Power Draw 44.2 Watts (Highly energy-efficient fixed internal PSU) Physical Form Factor 1U Rack-mountable (Standard mounting brackets included) Dimensions & Weight 44.2 cm x 24.74 cm x 4.39 cm / 3.42 kg Manufacturer Device Warranty Aruba Limited Lifetime Warranty SKU: n/a -
Networking Products, Computer Servers
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller (P47781-B21)
Networking Products, Computer ServersHPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller (P47781-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Part Number HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller (P47781-B21) Controller Architecture Broadcom MegaRAID (Aero ASIC Processor Core) Form Factor Design OCP NIC 3.0 Standard Low-Profile Profile Host Interface Bus PCI Express 4.0 x8 Host Link Speed Internal Storage Lanes x16 Total Internal Storage Lanes Physical Interface Ports 2×8 Low-Profile (LP) SlimSAS Storage Connectors Supported Storage Protocols 16Gbps NVMe / 12Gbps SAS / 6Gbps SATA Integrated Memory Cache 8GB High-Velocity Flash-Backed Write Cache (FBWC) Hardware RAID Levels RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60 JBOD / Pass-Through Mode Yes, supports Mixed-Mode operations (Simultaneous RAID & HBA) Maximum Drive Support Up to 16 physical drives directly connected (Expandable via SAS expander) System Management Utilities MRSA (MR Storage Administrator), StorCLI, UEFI System Utilities, Redfish API Server Generation Support Optimized for HPE ProLiant Gen11 Servers (DL325, DL345, DL365, DL380, DL385 Gen11) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL20 Gen11 1U Rack Server (P65396-421)
Technical Specifications
Feature Specification Details Model SKU / Part Number HPE ProLiant DL20 Gen11 1U Rack Server (P65396-421) Server Form Factor 1U Rackmount (Short-Depth Chassis Layout) Processor Type 1x Intel Xeon E-2436 (6 Cores / 12 Threads, 2.9GHz base, 5.0GHz Turbo, 18MB L3 Cache, 65W) Memory Config & Type 16GB (1x 16GB) Dual-Rank DDR5 ECC Unbuffered (UDIMM) Total System Memory Slots 4x DIMM Slots (Supports up to a maximum expansion of 128GB) Storage Disk Infrastructure 4x SFF (2.5-inch) Hot-Plug Drive Bays (Drives not included standard) Integrated Storage Controller Embedded Intel VROC SATA Software RAID (Supports RAID 0, 1, 5, 10) Wired Network Interface Embedded 4-Port 1GbE Base-T Network Adapter (Broadcom BCM5719) Power Supply Infrastructure 1x 500W Flex Slot Platinum Hot-Plug Power Supply Module Internal Expansion Lanes 1x OCP 3.0 Slot / Up to 2x PCIe Expansion Slots (Low-Profile / Full-Height) Remote Server Management HPE iLO 6 Standard (Integrated Lights-Out) with Intelligent Provisioning Chassis Mechanical Dimensions Height: 4.32 cm × Width: 43.46 cm × Depth: 38.22 cm (1.70 x 17.11 x 15.05 inches) Manufacturer Support Layer 3/3/3 Server Warranty (3 Years Parts, 3 Years Labor, 3 Years On-site Next Business Day Support) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 2U Enterprise Rack Server (P81784-425)
Networking Products, Computer ServersHPE ProLiant DL380 Gen11 2U Enterprise Rack Server (P81784-425)
Technical Specifications
Feature Specification Details Model SKU / Factory Part Number HPE ProLiant DL380 Gen11 2U Enterprise Rack Server (P81784-425) Server Form Factor 2U Rackmount (Standard Enterprise Server Depth Layout) Processor Configuration 1x Intel Xeon Gold 5416S (16 Cores / 32 Threads, 2.0GHz Base, 4.0GHz Turbo, 30MB L3 Cache, 150W TDP) Processor Upgradability Dual-Socket Capable (Supports scaling up to 2 physical processors on a single mainboard) Standard Memory Config 64 GB (2x 32 GB) Dual-Rank DDR5 Registered SmartMemory Total Memory Capacity 32 DIMM slots total (16 slots available per physical processor socket) Included Hard Drives 2x 480 GB SATA 6G Read-Intensive SFF (2.5-inch) Multi-Vendor Hot-Swap SSDs Storage Disk Bays 8x SFF (2.5-inch) Hot-Swap Drive Bays standard (Expandable via extra drive cages) Dedicated Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller Wired Network Interface Options via OCP 3.0 Slot or PCIe Riser Expansion adapters (Interface dependencies apply) Power Supply Configuration 2x 1000W Flex Slot Hot-Plug Low Halogen Redundant Power Supplies (1+1 Configuration) Remote Server Management HPE iLO 6 Standard Management Processor with Intelligent Provisioning Integrated System Security HPE Silicon Root of Trust, Secure Boot, TPM 2.0 Standard, Intel Boot Guard Manufacturer Support Layer 3/3/3 Server Warranty (3 Years Parts, 3 Years Labor, 3 Years On-site Next Business Day Support) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 2U High-Density Rack Server (P58417-B21)
Networking Products, Computer ServersHPE ProLiant DL380 Gen11 2U High-Density Rack Server (P58417-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Part Number HPE ProLiant DL380 Gen11 2U High-Density Rack Server (P58417-B21) Server Form Factor 2U Rackmount (Standard Deep Rack Layout) Processor Configuration 1x Intel Xeon Gold 6430 (32 Cores / 64 Threads, 2.1GHz Base, 3.4GHz Turbo, 60MB L3 Cache, 270W TDP) Processor Upgradability Dual-Socket Capable (Supports expansion up to 2 physical processors) Standard Memory Config 64 GB (2x 32 GB) Dual-Rank DDR5 Registered SmartMemory Total Memory Capacity 32 DIMM slots total (16 slots available per physical processor socket) Included Hard Drives None ship standard (Chassis is configured with empty drive carriers) Storage Disk Bays 8x SFF (2.5-inch) Hot-Swap Drive Bays standard (Expandable to 24x SFF front bays) Onboard Storage Controller Embedded SATA Controller (AHCI or Intel SATA Software RAID controller) Network Interface Card Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Cooling Architecture HPE ProLiant DL380/DL560 Gen11 2U High-Performance Fan Kit Power Supply Unit 1x 1000W Flex Slot Titanium Hot-Plug Power Supply Kit (Dual-power redundancy optional) Remote Server Management HPE iLO 6 Standard Management Processor with Intelligent Provisioning Integrated System Security HPE Silicon Root of Trust, Secure Boot, TPM 2.0 Standard, Intel Boot Guard Manufacturer Support Layer 3/3/3 Server Warranty (3 Years Parts, 3 Years Labor, 3 Years On-site Next Business Day Support) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 2U Rack Server (P52561-421)
Technical Specifications
Feature Specification Details Model SKU / Part Number HPE ProLiant DL380 Gen11 2U Rack Server (P52561-421) Server Form Factor 2U Rackmount (Standard Enterprise Chassis Layout) Processor Configuration 1x Intel Xeon Gold 5416S (16 Cores / 32 Threads, 2.0GHz base, 4.0GHz Turbo, 30MB L3 Cache, 150W) Processor Scalability Dual-Socket Capable (Supports a second physical CPU upgrade) Memory Config & Type 32GB (1x 32GB) Dual-Rank DDR5-4800 Registered SmartMemory Total Memory Expansion Slots 32 DIMM Slots total (16 slots populated per physical processor) Storage Disk Infrastructure 8x SFF (2.5-inch) Hot-Swap Drive Bays (Drives not included standard) Dedicated Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller Wired Network Interface Embedded 4-Port 1GbE Network Adapter (Supports teaming, link aggregation, and failover) Power Supply Infrastructure 1x 1000W Flex Slot Titanium Hot-Plug Power Supply Kit (Redundancy ready) Remote Server Management HPE iLO 6 Standard (Integrated Lights-Out) with Intelligent Provisioning Internal Expansion Lanes Up to 8x PCIe Gen5 slots available depending on chosen riser kits Manufacturer Support Layer 3/3/3 Server Warranty (3 Years Parts, 3 Years Labor, 3 Years On-site Next Business Day Support) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 2U Rack Server (P70456-421)
Technical Specifications
Feature Specification Details Model SKU / Part Number HPE ProLiant DL380 Gen11 2U Rack Server (P70456-421) Server Form Factor 2U Rackmount (Standard Full-Length Chassis Layout) Processor Configuration 1x Intel Xeon Silver 4509Y (8 Cores / 16 Threads, 2.6GHz base, 4.1GHz Turbo, 22.5MB L3 Cache, 125W) Processor Scalability Dual-Socket Capable (Supports expansion up to 2 physical CPUs) Memory Config & Type 32GB (1x 32GB) Dual-Rank DDR5-5600 Registered SmartMemory Total Memory Slots 32 DIMM Slots total (16 slots per physical processor) Storage Disk Infrastructure 8x SFF (2.5-inch) Hot-Swap Drive Bays (Drives not included standard) Dedicated Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller Wired Network Adapter Embedded 4-Port 1GbE Network Interface Card (Link Aggregation / Failover supported) Power Supply Infrastructure 1x 1000W Flex Slot Titanium Hot-Plug Power Supply Kit (Redundancy ready via 2nd slot) Remote Server Management HPE iLO 6 Standard (Integrated Lights-Out) with Intelligent Provisioning Internal Expansion Lanes Up to 8x PCIe Gen5 slots available depending on riser selection Manufacturer Support Layer 3/3/3 Server Warranty (3 Years Parts, 3 Years Labor, 3 Years On-site Next Business Day Support) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 Standard Fan Kit (P49146-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Option Part HPE ProLiant DL380 Gen11 Standard Fan Kit (P49146-B21) Spare Part Number Identification 49959-001 / P47685-001 Product Component Type Internal Server Chassis Cooling Fan Module Kit Total Included Fans 2x Independent Dual-Rotor Hot-Plug Fans Fan Dimension Category 60 mm Industry Standard Chassis Profile Processor Thermal Baseline Compatibility Tailored for CPUs with a TDP up to 205 Watts Retention Mechanism Handling Hot-Swappable / Toolless Latching (Blue Touchpoints) Server Hardware Bracket Gen Explicitly designed for HPE ProLiant Gen11 Architecture Primary Platform Compatibility HPE ProLiant DL380 Gen11 Packaged Net Weight Approximately 570 grams (1.25 lbs) SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380 Gen11 Standard Heat Sink Kit (P49145-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Option Part HPE ProLiant DL380 Gen11 Standard Heat Sink Kit (P49145-B21) Product Component Classification Standard CPU Passive Heat Sink / Thermal Solution Server Form Factor Match 2U Rackmount Configurations Only Processor Sockets Supported FCLGA4677 (Socket E1 Architecture) Processor Thermal Capacity Range Supports CPUs up to 150 Watts TDP Heatsink Cooling Mechanism Passive Fin Array (Relies on internal chassis system fans) Structural Composition Material Premium Copper Base with Aluminum Dissipation Fins Server Platform Generation Explicitly for HPE ProLiant Gen11 Architecture Primary Platform Compatibility HPE ProLiant DL380 Gen11 SKU: n/a -
Networking Products, Computer Servers
HPE ProLiant DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21)
Networking Products, Computer ServersHPE ProLiant DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21)
Technical Specifications
Feature Specification Details Model SKU / Factory Option Part HPE ProLiant DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21) Product Component Classification High Performance CPU Passive Heat Sink / Thermal Solution Server Form Factor Match 2U Rackmount Configurations Only Processor Sockets Supported FCLGA4677 (Socket E1 Architecture) Processor Thermal Capacity Range Supports CPUs from 150 Watts up to 350 Watts TDP Heatsink Cooling Mechanism Passive Fin Array (Relies on internal chassis system fans) Structural Composition Material Premium Copper Base & Heatpipes with Aluminum Dissipation Fins Physical Dimensions 25.3 cm x 28.8 cm x 13.5 cm (Packaged standard box size) Net Hardware Weight 0.78 kg (1.72 lbs) Server Platform Generation Explicitly for HPE ProLiant Gen11 Architecture Primary Platform Compatibility HPE ProLiant DL380 Gen11, HPE ProLiant DL560 Gen11 SKU: n/a -
POS Systems
IDP SMART Series – Long Sleeve Cleaning Card Kit (10 Pcs)
Key Technical Specifications
Feature Technical Specification Manufacturer & Part Number IDP Corp (Part: 659909 / 659008 variant compatibility) Kit Contents 10 x Specialized Long-Sleeve Cleaning Cards Cleaning Operation Automated cycle (Triggered via printer driver/control panel) Printer Compatibility IDP SMART-31, SMART-51, SMART-70, SMART-81 series & SOLID lines Recommended Usage Typically at every ribbon change or every 500 to 1,000 cards SKU: n/a -
POS Systems
IDP SMART-51 (Clear Patch 1.0 mil / 25 µm) – In-Line ID Card Laminate Film
Key Technical Specifications
Feature Technical Specification Model & Part Number IDP Smart S51 Clear Patch Laminate Film (Part: 659390) Film Thickness 1.0 mil (25 microns / 25.4 µm) Print / Yield Capacity Up to 250 cards per roll Printer Compatibility IDP SMART-51L (Laminating In-Line Engine) Card Substrates ISO CR80 / CR79 (PVC, PET, Composite PVC) SKU: n/a -
POS Systems
IDP SMART-51 (Monochrome K)Â Black Resin ID Card Ribbon
Key Technical Specifications
Feature Technical Specification Model & Part Number IDP Smart S51 Black Monochrome Ribbon (Part: 659367) Ribbon Configuration Monochrome Black Resin (K) Print Capacity Yield Up to 1,200 single-sided prints / 600 dual-sided prints Printer Compatibility IDP SMART-31S, SMART-31D, SMART-51S, SMART-51D, and SMART-51L Included Maintenance 1 x Disposable Cleaning Roller included SKU: n/a -
POS Systems
IDP SMART-51 (Monochrome White) – High-Capacity White Resin ID Card Ribbon
Key Technical Specifications
Feature Technical Specification Model & Part Number IDP Smart S51 White Monochrome Ribbon (Part: 659370) Ribbon Configuration Monochrome White Resin (W) Print Capacity Yield Up to 1,200 single-sided prints per roll Printer Compatibility IDP SMART-31S, SMART-31D, SMART-51S, SMART-51D, and SMART-51L Included Maintenance 1 x Disposable Cleaning Roller included SKU: n/a -
POS Systems
IDP SMART-51 (YMCKO 5-Panel)
Key Technical Specifications
Feature Technical Specification Model & Part Number IDP Smart S51 YMCKO Color Ribbon (Part: 659366) Ribbon Configuration YMCKO (Yellow, Magenta, Cyan, Black, Overlay) Print Capacity Yield Up to 250 single-sided card prints per roll Printer Compatibility IDP SMART-31S, SMART-51S, SMART-51D, and SMART-51L Included Maintenance 1 x Disposable Cleaning Roller included SKU: n/a -
POS Systems
IDP SMART-51 (YMCKOK 6-Panel)
Key Technical Specifications
Feature Technical Specification Model & Part Number IDP Smart S51 YMCKOK Color Ribbon (Part: 659376) Ribbon Configuration YMCKOK (Yellow, Magenta, Cyan, Black, Overlay, Black) Print Capacity Yield Up to 200 dual-sided card prints per roll Printer Compatibility IDP SMART-51D, SMART-51L, and select dual-sided IDP engines Included Maintenance 1 x Disposable Cleaning Roller included with each roll SKU: n/a -
POS Systems
IDP SMART-51 Internal Smart Card Encoder Module
Key Technical Specifications
Feature Technical Specification Model Compatibility IDP SMART-51S, SMART-51D, and SMART-51L Series Printers Encoder Type Internal Contact & Contactless Smart Card Module Contact Protocols ISO 7816 (ID-1 / IC Chip contact station) Contactless Frequency 13.56 MHz RF / Chip Standards ISO 14443 (Type A/B), MIFARE, DESFire, i-Class, ISO 18092 NFC Communication Interface Internal USB / Ethernet bridge routed via printer mainboard Warranty Coverage 1-Year to 3-Year Limited Hardware Warranty (Aligned with host printer) SKU: n/a -
POS Systems
IDP SMART-51 Series Replacement Thermal Printhead (300 dpi)
Key Technical Specifications
Feature Technical Specification Model Compatibility IDP SMART-51S, SMART-51D, and SMART-51L Series Printers Part Number 651411 (Standard direct thermal/thermal transfer assembly) Print Resolution 300 dpi ($11.8\text{ dots/mm}$) Print Technology Direct Dye-Sublimation & Resin Thermal Transfer Handling Precaution Sensitive electrostatic/thermal array component; requires careful anti-static installation and software resistance calibration Warranty Coverage 1-Year Limited Manufacturer Replacement Warranty SKU: n/a -
POS Systems
IDP SMART-51D (Dual-Sided)
Key Technical Specifications
Feature Technical Specification Model & Type IDP SMART-51D Dual-Sided Direct-to-Card ID Printer Print Technology Direct Dye-Sublimation / Resin Thermal Transfer Print Resolution 300 dpi (Color & Mono), up to 600 & 1200 dpi (Mono optional) Print Speed (Color) Max. 17 sec/card (YMCKO – 212 cards/hour); Max. 22 sec/card (YMCKOK – 164 cards/hour) Print Speed (Mono) Max. 5 seconds per card (720 cards/hour) Card Capacity Input Hopper: 100 cards (up to 200 with cover open); Output: 40 front / 100 rear Card Standards ISO CR80 or CR79 (PVC, PET, Composite PVC) Interface Connectivity USB standard, Ethernet (optional/upgradeable), Wi-Fi (optional) System Compatibility Microsoft Windows, macOS, and Linux Warranty Coverage 3-Year Limited Manufacturer Warranty SKU: n/a -
POS Systems
IDP SMART-51L (Dual-Sided with Lamination)
Key Technical Specifications
Feature Technical Specification Model & Type IDP SMART-51L Dual-Sided ID Card Printer with Integrated Lamination Print Technology Direct Dye-Sublimation / Resin Thermal Transfer Print Resolution 300 dpi (Color & Mono), up to 600 & 1200 dpi (Mono optional) Print & Laminate Speed Max. 22 sec/card (YMCK + Single Lamination); Max. 32 sec/card (YMCKK) Laminator Warm-up 8 seconds (Patented Direct Lamination technology) Card Capacity Input Hopper: 100 cards (up to 200 with open cover); Output: 40 front / 100 rear option Card Standards ISO CR80 or CR79 (PVC, PET, Composite PVC) Interface Connectivity USB standard, Ethernet (Optional upgrade/Ethernet variants available) System Compatibility Microsoft Windows, macOS, and Linux Warranty Coverage 3-Year Limited Manufacturer Warranty SKU: n/a -
POS Systems
IDP SMART-51S (Single-Sided)
Key Technical Specifications
Feature Technical Specification Model & Type IDP SMART-51S Single-Sided Direct-to-Card ID Printer Print Technology Direct Dye-Sublimation / Resin Thermal Transfer Print Resolution 300 dpi (Color & Mono), up to 600 & 1200 dpi (Mono optional) Print Speed (Color) Max. 17 seconds per card (YMCKO – approx. 212 cards/hour) Print Speed (Mono) Max. 5 seconds per card (720 cards/hour) Card Capacity Input Hopper: 100 cards (up to 200 with cover open); Output: 40 front / 100 rear Card Standards ISO CR80 or CR79 (PVC, PET, Composite PVC) Interface Connectivity USB standard (Ethernet & Wi-Fi available via optional upgrade modules) System Compatibility Microsoft Windows, macOS, and Linux Warranty Coverage 1-Year to 3-Year Limited Manufacturer Warranty (depending on distributor tier) SKU: n/a
