,

HP Spectre x360 13-ea Touch Screen Display Assembly


 

Technical Specifications

Specification Feature Details
Brand & Compatibility HP Spectre x360 13-ea0000 Series (13-ea0xxx Touch Configurations)
Part / Supplier SKU HP Spectre 13-ea TS / SKU 71579 / 2086 Series Assembly
Assembly Type Bonded 13.3″ Display Panel + Capacitive Touch Digitizer Glass (Complete Front Assembly)
Screen Size & Aspect Ratio 13.3-Inch Micro-Edge Widescreen; 16:9 Aspect Ratio
Panel Technology OLED (Organic Light Emitting Diode) / BrightView IPS (Configuration-Dependent)
Native Resolution & Refresh Full HD (1920 × 1080) at 60Hz
Brightness & Surface Finish 400 nits Typical / 500 nits HDR Peak Brightness; Glossy Corning Gorilla Glass NBT
Touch & Stylus Support 10-Point Capacitive Multi-Touch + HP Rechargeable MPP 2.0 Tilt Pen Ready
Interface Connector 30-Pin / 40-Pin eDP (Matched to Exact 13-ea FHD IPS vs. OLED Variant)
Bezel Color & Condition Nightfall Black / Dark Ash Micro-Edge Border; Brand New OEM-Grade Factory-Tested Assembly
Warranty 6-Months Store Warranty Included

KSh 22,100.00

Order Via WhatsApp

HP Spectre x360 13-ea Touch Screen Display Assembly ( 2086)

Product Overview

The HP Spectre x360 13-ea Touch Screen Display Assembly (HP Spectre 13-ea TS / Supplier SKU: 71579 / 2086) is a factory-grade 13.3-inch Full HD (1920 × 1080) capacitive multi-touch display replacement assembly engineered specifically for the  Spectre x360 13-ea0000 2-in-1 convertible ultrabook series (13-ea0xxx touch configurations). Featuring crisp Full HD (1920 × 1080) resolution, OLED / BrightView IPS panel options delivering 400 nits typical / 500 nits HDR peak brightness, and a flush-bonded 10-point capacitive multi-touch digitizer behind Corning Gorilla Glass NBT edge-to-edge protective glass, it restores factory visual brilliance, deep contrast, and smooth stylus/finger touch navigation to cracked, flickering, or unresponsive convertible screens.

Built with an integrated touch controller board, a 60Hz refresh rate, and a precision 30-pin / 40-pin eDP (Embedded DisplayPort) interface connector matched to your exact 13-ea display cable, this bonded LCD/OLED + Touch Digitizer module integrates cleanly into the Spectre x360 13-ea’s 360-degree gem-cut aluminum hinge lid without chassis modifications. Whether servicing laptop repair center orders or restoring an executive convertible workstation, it provides dependable OEM-grade visual performance with fast nationwide delivery across Kenya.

 Technical Specifications

Specification Feature Details
Brand & Compatibility HP Spectre x360 13-ea0000 Series (13-ea0xxx Touch Configurations)
Part / Supplier SKU HP Spectre 13-ea TS / SKU 71579 / 2086 Series Assembly
Assembly Type Bonded 13.3″ Display Panel + Capacitive Touch Digitizer Glass (Complete Front Assembly)
Screen Size & Aspect Ratio 13.3-Inch Micro-Edge Widescreen; 16:9 Aspect Ratio
Panel Technology OLED (Organic Light Emitting Diode) / BrightView IPS (Configuration-Dependent)
Native Resolution & Refresh Full HD (1920 × 1080) at 60Hz
Brightness & Surface Finish 400 nits Typical / 500 nits HDR Peak Brightness; Glossy Corning Gorilla Glass NBT
Touch & Stylus Support 10-Point Capacitive Multi-Touch + HP Rechargeable MPP 2.0 Tilt Pen Ready
Interface Connector 30-Pin / 40-Pin eDP (Matched to Exact 13-ea FHD IPS vs. OLED Variant)
Bezel Color & Condition Nightfall Black / Dark Ash Micro-Edge Border; Brand New OEM-Grade Factory-Tested Assembly
Warranty 6-Months Store Warranty Included

HP 13-ea Touch Screen Pros & Key Benefits

  • Complete Factory-Bonded Touch + Display Module: Combines the 13.3″ Full HD display panel and capacitive touch digitizer into one sealed assembly—eliminating risky glass-to-panel separation.

  • Cinema-Grade 1080p Visuals (400–500 nits): Restores crisp 1920 × 1080 clarity, vivid color accuracy, and high-brightness readability across laptop, tent, stand, and tablet modes.

  • 10-Point Multi-Touch & HP Tilt Pen Support: Delivers responsive multi-finger gestures and MPP 2.0 stylus precision immediately upon installation with zero driver setup.

  • Corning Gorilla Glass NBT Edge-to-Edge Protection: Hardened glossy protective glass resists everyday scratches while preserving the signature gem-cut profile of the HP Spectre x360 13-ea.

  • Cost-Effective Flagship Convertible Restoration: Revives a cracked or dead-touch HP Spectre x360 13-ea at a fraction of the cost of replacing the entire ultrabook.

 Spectre 13-ea Touch Screen Variation Price Table

Item Variant Specification Detail Stock Status KES Price
HP Spectre x360 13-ea 13.3″ FHD Touch Assembly (Part Only) 13.3″ FHD (1920×1080) OLED/IPS, 10-Point Touch, 30-Pin / 40-Pin eDP Match In Stock KES 18,360 – KES 21,500
HP Spectre x360 13-ea Touch Assembly (With Technician Fitting) 13.3″ FHD Touch Assembly + Professional Surgical Installation & Testing In Stock KES 24,000 – KES 28,000
HP Envy x360 13-bf 13.3″ WUXGA Touch Screen Assembly 13.3″ 16:10 IPS, 1920×1200, 400 nits, 10-Point Touch, 40-Pin eDP (SKU: 3904) In Stock KES 22,500 – KES 26,500

HP Spectre 13-ea Touch Screen Suitable Application Areas

  • Laptop Repair Workshops & Specialized Technicians: OEM-grade replacement display assembly for resolving shattered glass, dead pixels, ghost touches, or vertical lines on HP Spectre x360 13-ea convertibles.

  • Corporate IT Support & Executive Fleets: Restores business-issued HP Spectre x360 ultrabooks rapidly with minimal downtime.

  • Photographers, Designers & Mobile Professionals: Brings damaged 360-degree convertible screens back to full 1080p multi-touch and stylus productivity for creative editing, presentations, and travel.

 Canonical Resource & Documentation Link

For laptop display replacement compatibility checks, hardware maintenance guidance, and official support documentation, review the HP ProDesk 400 G6 i3 SFF User Guide & Support Manuals on Potent.it Store. Place your order online today for fast countrywide delivery across Kenya.

FAQs for HP Spectre x360 13-ea Touch Screen Display Assembly (HP Spectre 13-ea TS)

Q1: Will this HP Spectre 13-ea screen assembly fit the HP Spectre x360 14-ea or older 13-aw / 13-ap models?

No. The HP Spectre x360 13-ea uses a 13.3-inch 16:9 chassis whose dimensions and hinge mounts differ from the 13.5-inch 3:2 Spectre x360 14-ea as well as older 13-aw and 13-ap generations. Always verify your exact laptop model (HP Spectre x360 13-ea...) before ordering.

Q2: Does my HP Spectre x360 13-ea use a 30-pin or 40-pin eDP connector?

Depending on whether your laptop shipped with the standard Full HD IPS panel (30-pin eDP) or the Full HD OLED / 4K UHD configuration (40-pin eDP), the internal display ribbon differs. Please confirm your original panel type and eDP connector pin count prior to installation.

Q3: Is professional technician installation recommended?

Yes. Because the HP Spectre x360 13-ea features ultra-thin micro-edge glass tolerances, delicate bezel adhesives, and fragile eDP motherboard latches, professional technician installation is strongly recommended (always disconnect the internal battery before servicing).

Q4: How fast is delivery across Kenya?

Potent.it Store provides same-day delivery within Nairobi and 24 to 48-hour door-to-door delivery nationwide.

HP 13-ea What is in the Box?

 Creative Summary

The HP Spectre x360 13-ea Touch Screen Display Assembly (HP Spectre 13-ea TS) restores factory 13.3″ Full HD (1920 × 1080) clarity, 400–500 nits brightness, 10-point capacitive multi-touch responsiveness, and Corning Gorilla Glass NBT durability in a factory-bonded display and digitizer unit. Engineered for seamless fitment on HP Spectre x360 13-ea convertibles, it delivers reliable display restoration across Kenya.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “HP Spectre x360 13-ea Touch Screen Display Assembly”

There are no reviews yet.

Powered by Joinchat